Mulex Lpe32000 32gfc Hba Card Pcie 3.0 Fibre Channel Card

• Customization: Available
• Type: Wired
• Bandwidth: 32gbps
• Model NO.: LPe32000
• Interface: PCI-E 3.0 X8 Interface SFP+Interface
• Transmission Rate: 32gbps
• Application: Server
• Connecting Medium: Optical Fiber Cable
• Motherboard Integrated: Separate Network Card
• Frequency Range: Single Frequency
• Type of Network: 10-Gigabit Ethernet
• Field: Server
• Hardware Environment: Powerpc, Sparc, X86, X64 and Intel Itanium 64-Bit
• Host Bus Type: Pcie Gen3 Graphics Card X8
• Working Humidity: 5% to 95% Without Condensation.
• Storage Temperature: -20 to 85 C (-4 to 185°f)
• Transport Package: Original Packaging
• Specification: 167.64mm x 68.91mm
• Trademark: mulex
• Origin: China

Product Description

The Emulex Gen 6 (16/32G) Fibre Channel (FC) Host Bus Adapters (HBAs) by Broadcom are designed to address the demanding performance, reliability and management requirements of modern networked storage systems that utilize high performance and low latency solid state storage drives and hard disk drive arrays.
Fibre Channel is known as the gold standard for network storage connectivity in enterprise and cloud deployments. The latest Emulex Gen 6 FC HBAs with Dynamic Multi-core architecture offer higher performance, lower latency, enhanced diagnostics and manageability that benefit both 16GFC and 32GFC environments. 
The unique Emulex Dynamic Multi-core architecture delivers unparalleled performance and more efficient port utilization than other HBAs by applying all ASIC resources to any port that needs it. Compared to the previous generation, Emulex Gen 6 HBAs deliver 2x greater bandwidth - 12,800MBps (2 ports 32GFC, or 4 ports 16GFC, full duplex), less than half the latency, and support an industry-leading 1.6 million IOPS per adapter. The quad-port LPe32004 delivers up to 3.2 million IOPS per adapter.
The adapters are NVMe over Fabrics-enabled, delivering an additional 55% lower latency than SCSI, and support NVMe over Fabrics and SCSI concurrently.
Emulex LPe31000-series HBAs are available with single, dual or quad 16GFC optics that can be upgraded with 32GFC optics later to utilize the full performance of Gen 6 FC technology. A second quad-port 16GFC model is available that features a low-profile design. It provides the highest port density within a low-profile form factor (optics are not upgradeable). 
The LPe32000-series is available with single, dual or quad 32GFC optics.
 

Specification	Value
Lifecycle	Active
Distrib. Inventory	Yes
Ordering Part #	LPe32000-M2, 1 Port 32GFC Short Wave Optical - LC SFP+
Ordering Optional Accessories	LP32-LW-OPT-1 32GFC Optic (longwave laser with LC connector SFP+ transceiver): 1 pack, LP32-LW-OPT-2 32GFC Optics (longwave laser with LC connector SFP+ transceiver): 2 pack
Whats in the box	Each box includes: Quantity 1, low-profile Host Bus Adapter, with Optic/s Quantity 1, full-height bracket Quantity 1, low-profile bracket  Quantity 1, Firmware download sheet and RoHS sheet
Generation	Gen 6 (32/16GFC)
Physical Dimensions	Short, low profile PCIe card, 167.64mm x 68.91mm (6.60" x 2.71"), Standard bracket (low profile bracket ships in box)
Cable Support	100m at 32Gb on 50/125 μm OM4 MMF, 20m at 32Gb on 50/125 μm OM2 MMF, 70m at 32Gb on 50/125 μm OM3 MMF, Operating at 32Gb
Optical Data Rates	28.05 Gb/s (3200Mb/s), 14.025 Gb/s (1600Mb/s), 8.5 Gb/s (800Mb/s) (auto-detected)
Hardware Environment	PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family
Ports	1
Optics	Optics Short wave lasers with LC type connector optics
Host Bus Type	PCIe Gen3 x8
I/O Controller	XE501
Operating Humidity	5% to 95% non-condensing
Storage Temperature	-20° to 85°C (-4° to 185°F)
OS Support	Additional support is available from OEMs and partners, Oracle Solaris, SUSE® Linux Enterprise Server, VMware vSphere
Industry Standards	Current ANSI/IETF Standards: FC-PI-4, FC-DA, FC-DA-2, FC-FS, FC-GS-6, FC-LS-2, FC-PH-2, FC-PH-3, FC-PI, FC-PI-2, FC-PI-5, FCP-4, Fibre Channel class 3, Legacy ANSI/IETF standards: FC-PH, PCIe base spec 3.0, PCIe card electromechanical spec 3.0, PHP hot plug-hot swap, SBC-3, SPC-4, SSC-4
Regulatory Certifications	[Australia(RCM), Japan(VCCI Class A), China(China RoHS Compliant), Europe(CE Mark, EU RoHS compliant,TUV Bauart Certified), Korea(MSIP[formerly KCC/MIC]Class A), Taiwan(BSMI Class A)]